Vista Ultimate x64

[msensei]

Greetings when i try run as administrator to install gbridge-10b1098-xp--setup on Vista Ultimate x64 i get stuck right after the black popups for the VPN driver...
Install Gbridge driver failed, ret code 2. Do you want to retry? (Please close all network properties windows)

works great on my xp 32 :)

[Herodotus]

Thanks for using gbridge, unfortunately currently only 32bit Vista is supported. We are working on the 64bit version though.

Please introduce Gbridge to your friends, many thanks!

[msensei]

can i help somehow?

<---- engineer :D

[admin]

We will pm you the link to the x64 beta version once we have it and let you help us to identify potential problems :-)

If you like http://gbridge.com , please write review, blog, bbs post, or just introduce it to your friends!

Thanks!

[msensei]

We like it and will definately help beta test for you as we have many other products.

[M]

[Unregistered]

Is the same true for Windows XP x64 Edition? I got the same error when I tried to install it.

If so, I wouldn't mind beta testing or writing a review

[admin]

> Is the same true for Windows XP x64 Edition? I got the same error when I tried to install it.

Yes, it is true for windows xp x64. We will let you know once we have the 64x version and let you beta test it. Please register an account so we can notify you. Thanks a lot!

[Unregistered]

I also have a Vista 64 bit laptop. The program loaded easily on my XP desktop, but stalled on the laptop. How long until the 64 bit verson gomes out?

[admin]

I also have a Vista 64 bit laptop. The program loaded easily on my XP desktop, but stalled on the laptop. How long until the 64 bit verson gomes out?

It may take around 2 months. Please pm your email address if you want to get notified when it is available.

[dteich02]

I am having the same problem - please keep us updated.

[unique]

I would also love to know when the x64 version is available, would love to continue using GBridge :)

[hal9000]

my main media centre pc is a vista ultimate x64, my work pc is a vista business 32 and my laptops are a Mac book pro and a macbook

Quite a mix

[thefunkygibbon]

piping up to request being informed of a 64bit version as my main pc is 64bit vista, laptop is 32bit xp.

[Unregistered]

Add support !! I was really looking forward to using this between an old desktop and new laptop (x64) :)

[elanaqua]

Hi my name is Elan and I'm a first time poster here. My friend recommended this program for me so that I could set up a share for some folks who were recently deployed. Sadly this does not support x64 I was curious if it was because of the programs incompatibility with the platform? Or with the overall problems with x64 systems and VPN in general. I know a lot of companies are not offering support, or they are but through various third party programs. (I.E. Junipers networks, or Cisco's: Cisco AnyConnect VPN Client)

Good luck with the future of this program!

[admin]

Thanks Elan! We will let you know once we have the 64 bits version.

[Meetloaf13]

Yeah, I almost peed my pants when I saw this gem, but I am an avid x64 user as well.

We're a mounting group! Please the masses!

=)

If it helps, hamachi worked wonderfully for me in x64...but they just changed licensing, so stinko for the cheapskates.

[centralparker]

i was so psyched to see this app! but then i got smacked with this error message... hook some bruthas up!

[Unregistered]

I'm waiting for this too! Cant wait till it's out its a great program i just with i could use it on my main desktop!

[centralparker]

will it be supported anytime soon? or should we look for another app?

[Unregistered]

Folks,

Please notify me too about x64 version, even if beta.

Thanks!
Renan Viegas
renan.viegas@gmail.com

[kalidust]

I have a Vista 64-bit laptop. I would like to know when the 64-bit version will be available, even the Beta.

[epic]

Add me to the 64-bit fanclub. :)

[Unregistered]

count me in

Chazz Blackwell
ceb0610@gmail.com

[admin]

Give us 2-3 weeks ...

[yishay]

Please let the program run on 64 bit OS too.

[eluers1]

I'll be waiting

[Meinlein]

Count me in also - waiting for a vista x64 build to test/use.

thanks

[admin]

Gbridge X64 beta is available now. For the one who asked for it, please check your forum message box or email for download location.

Currently the driver is not signed, so you have to disable the "driver sign enforcement" to make it work. you can :
1. reboot the windows and press F8 and select "disable driver sign enforcement", or
2. if you have better way to work around the driver sign issue, please share with the rest of us.

The gbridge x64 beta will be available to the general public in a few days if the feedback is positive.

[dentity]

I too would like to try the Gbridge X64 beta. thank you in advance.

[QuatroThinko]

Yo
As you know I've been a big Gbridge fan for at least two weeks now. I was excited with the prospect of syncing/sharing from my old system to my new quad core. How about adding Flash Buddy to the "Wish I had Gbridge on my Vista 64X Sys.?!

[kalidust]

I've successfully installed gbridge 64 bit beta on my laptop.

So far the only issue I see is that when I login to my desktop from my laptop (64 bit), the screen is squashed which makes it difficult to read.

When I login to my laptop (64 bit) from my desktop, it is squashed.

[admin]

I've successfully installed gridge 64 bit beta on my laptop.

So far the only issue I see is that when I login to my desktop from my laptop (64 bit), the screen is squashed which makes it difficult to read.

When I login to my laptop (64 bit) from my desktop, it is not squashed.

Does your desktop has higher resolution than your laptop? Gbridge automatically resize the remote windows to fit to your local window. Click vnc viewer's left-top icon and you will find some menus to tweak. Or just do a Ctrl-F11 to disable the auto-scaling

[kalidust]

Does your desktop has higher resolution than your laptop? Gbridge automatically resize the remote windows to fit to your local window. Click vnc viewer's left-top icon and you will find some menus to tweak. Or just do a Ctrl-F11 to disable the auto-scaling

My laptop has a higher resolution than my desktop. I previously tried changing the resolution on my laptop to the same as my desktop and that squashed it even more. However I was able to adjust the screen size using the VNC view's icon - thanks.

An another issue regarding rebooting the windows and press F8 and select "disable driver sign enforcement, should this been done every time the computer is started? I had shut down my laptop after doing that and then turned it on again and I had to again disable driver sign enforcement.

[admin]

and press F8 and select "disable driver sign enforcement, should this been done every time the computer is started?That is correct. We are working on this issue.

[jdsangster]

Howdy, I am also a Vista 64 users and am keenly interested in being a tester for this beta. please feel free to send over the info :)

Thanks for making such an amazing tool. It's revolutionized my work in the office so i can't wait to be able to use it at home now too!

[Unregistered]

Using the beta, install seems to have succeeded yet Gbridge won't start. Here is a log excerpt:20.759311(4652):notic:0x00100000:VpnpAgent Control.cpp:237::found card NVIDIA nForce Networking Controller
21.285512(4652):error:0x00000010:VpnpRedirector.cp p:455::driver open failed
23.010664(4652):notic:0x00100000:VpnpAgentControl. cpp:258::DNS probe failed
23.113486(4652):notic:0x00100000:VpnpAgentControl. cpp:276::7 probe failed
23.114253(4652):notic:0x00100000:VpnpAgentControl. cpp:282::too many retry. 7
24.286516(4652):error:0x00000010:VpnpRedirector.cp p:455::driver open failed
Suggestions?

[admin]

did you boot vista with "disable driver sign enforcement" option? Otherwise, the beta won't work. Press F8 when you boot vista x64.

[gz0n3]

Would it be possible to get the beta also. I have been dying to try it but my main desktop is 64 bit so i have been waiting.

Gz0n3@yahoo.com is my email.

[kubi]

Ditto, I'd like to be able to vpn/vnc to my desktop (32bit xp pro) from my laptop (64bit vista premium).
I'm willing to be a guinea pig too.

[admin]

Ditto, I'd like to be able to vpn/vnc to my desktop (32bit xp pro) from my laptop (64bit vista premium).
I'm willing to be a guinea pig too.
PMed the link to you.

[admin]

Would it be possible to get the beta also. I have been dying to try it but my main desktop is 64 bit so i have been waiting.

Gz0n3@yahoo.com is my email.
check your email for the link.

[jr2408]

Hi there I have been lurking here for some time waiting for the x64 version - is it possible that you can allow me to use the beta?

Thanks, J

[admin]

The x64 beta is available to general public now:

http://www.gbridge.com/check_version/gbridge-x64-rc2.exe (http://www.gbridge.com/check_version/gbridge-x64-rc2.exe)

We have signed the x64 driver, so you don't need to disable the "driver verification enforcement" any more. Vista might still complain about "cannot verify publisher" during installation though, you can just ignore it.

Please post your feedback, thanks!

[kalidust]

I just installed it and it says the same thing as before (with the beta) about not being installed properly (which before I had to disabled driver verification enforcement).

I had tried uninstalling the beta version and reinstalling the new version but still the same.

[admin]

does it function correctly? There is a bug that causes false alarm in the installer and we are still working on it.

[kalidust]

does it function correctly? There is a bug that causes false alarm in the installer and we are still working on it.

Yes it is functional. Just have to boot up disabling driver verification enforcement.

[msensei]

so i have done the install twice now, when i go to run it, i get a pop up which says "GBridge is not installed properly. Please reboot, reinstall Gbridge, then reboot and try again."

Vista ultimate x64

[koruptid]

I've installed the latest public beta twice, so far no luck. I'd really like to find a way to get this working that doesn't involve booting a hack off a USB stick.

[admin]

sorry, the signing proess was messed up. will fix it soon.

[admin]

The x64 beta rc3 is available to general public now, try at your own risk though
http://www.gbridge.com/check_version/gbridge-x64-rc3.exe
We have signed the x64 driver, so you don't need to disable the "driver verification enforcement" any more. Vista might still complain about "cannot verify publisher" during installation though, you can just ignore it.

Please post your feedback, thanks!

[koruptid]

RC3 appears to be functional with signed drivers, thank the team for their wonderful hard work!!

[kalidust]

RC3 worked for me :)

[Unregistered]

Just installed RC2 - No Joy, same as before.

[Coach Flash]

RC3 worked for me :)

Hey Kalidust, good to see you here!

There is an RC3?! No I'm getting excited. I'll download that puppy and report back...

[kalidust]

Just installed RC2 - No Joy, same as before.

Try the latest release RC3.

[Coach Flash]

Been there, done that. VOILA! I'm Gbridged again. Thanks guys, y'all seriously rock.

[danielcrogers]

please send me driver for 64 bit when ready, thanks as connot use g-bridge as is, thanks

[admin]

please send me driver for 64 bit when ready, thanks as connot use g-bridge as is, thanks
Please try this:

http://www.gbridge.com/check_version/gbridge-x64-rc3.exe

[kalidust]

Since I have gBridge working on my laptop, I cannot access my desktop via my regular network (can do so with gBridge). Also can't access my network printer that is installed on the desktop.

[admin]

Since I have gBridge working on my laptop, I cannot access my desktop via my regular network (can do so with gBridge). Also can't access my network printer that is installed on the desktop.
Can you try make your regular network "private", see it will help or not? Is your gbridge network "private" on your laptop?

Can you PM me your "ipconfig /all" output on your laptop? and "route print" output. Thanks!

When you access your desktop via regualr network, you specify the ip or the machine name of your desktop?

[kalidust]

Not sure how to have my regular network private nor how to make gbridge private.

I'm pm'd my info to you.

[kalidust]

Now it is working. I had gBridge set to require a password for me to access my own computers. Although when trying to access my regular network, I was trying the password however it didn't go through.

Once I removed the requirement on gBridge for a password to my computers, I could log in to my regular network.

[kubi]

No problems in the install or use with the rc3 beta client.
I have yet to reboot my laptop though if that related error is still there (I use hibernate a lot).
On another note, the desktop share does not show the wallpaper when I vnc to my 32bit desktop, I'm not sure if that is just a limitation on the vnc client or not but wanted to bring it up.

[kalidust]

Now it is working. I had gBridge set to require a password for me to access my own computers. Although when trying to access my regular network, I was trying the password however it didn't go through.

Once I removed the requirement on gBridge for a password to my computers, I could log in to my regular network.

Shutdown my laptop and turned it on again and again it isn't letting me access my regular network from my laptop.

[admin]

Shutdown my laptop and turned it on again and again it isn't letting me access my regular network from my laptop.

We have identified a bug, and will release a fix soon. Do you want to test a preview of the fix? Thanks!

[kalidust]

We have identified a bug, and will release a fix soon. Do you want to test a preview of the fix? Thanks!

Sure will.

[admin]

pmed you the link. please use the test installer to reinstall all your gbridge computers (include x32 ones)

[kalidust]

Admin, sent you a pm. That worked :)

[marknyquist]

How does one request a download for the Vista x64 version?
Thanks!

Mark

[admin]

1.0.0.1141 is released. It supports both x64 and 32bits windows.

http://www.gbridge.com (http://www.gbridge.com)

[kalidust]

1.0.0.1141 is released. It supports both x64 and 32bits windows.

http://www.gbridge.com (http://www.gbridge.com)

Is this the same one you provided to me via PM to test?

[admin]

Hi, Everybody

1.0.0.1141 is released. It supports both X64 and 32bit windows. You can download it at the link below.

BTW, if you really like Gbridge, please take a few minute to rate/review it at download.com (http://www.download.com/Gbridge/3000-7240_4-10877073.html?tag=mncol&cdlPid=10896594). Thanks you very much!

http://www.gbridge.com

[admin]

Is this the same one you provided to me via PM to test?
1.0.0.1141 has some additional small bug-fixes.

[msensei]

Ok it's working well.
Thanks!

[Unregistered]

Hi All,
I am not able to share my directory as well as I can not see them when I browse my own shared directory. I think the problem is based on the fact that gbridge recongnise only the first 8 digit of my hostname but my vista machine has a hostname longer than 8 digits and I do not have the admin right to change it.

Can you suggest a solution to bypass this problem?

Cheers,
Unregistered

[admin]

Can you use gbridge to browse the local SecureShare? If you cannot, likely gbridge is blocked by your local firewall on your vista machine.

Hi All,
I am not able to share my directory as well as I can not see them when I browse my own shared directory. I think the problem is based on the fact that gbridge recongnise only the first 8 digit of my hostname but my vista machine has a hostname longer than 8 digits and I do not have the admin right to change it.

Can you suggest a solution to bypass this problem?

Cheers,
Unregistered

[Unregistered]

No I can't.
I will try to manage it.

Thanks and Cheers,
Unregistered